6. System Configuration
34
6.2 Display Parameters
Language:
This parameter is used to display the current language used by the
terminal. For multilingualcapable terminals, you can switch between different
languages through this parameter.
Toolbar:
This parameter is used to display style of the shortcut keys on the initial
interface. It can be set to “Auto Hide” and “Permanent Display”. By selecting “Auto
Hide”, you can manually display or hide the toolbar. By selecting “Permanent
Display”, you can permanently display the toolbar on the initial interface.
Default Verify Mode:
This parameter is used to set the default verification mode,
that is, the "Fingerprint" or “Face” verification mode.
Picture Delay (S): This parameter is used to set the picture cycle interval (value
scope: 3─999 seconds).
Sleep Time (S):
This parameter is used to specify a period after which the terminal
is put in sleep mode if not operated within this period. You can bring up the terminal
from sleep by pressing any key or touching the screen.
