iFace100 Series Product User Manual
57
Appendix 2 Photo ID Function
★
The Photo ID function is used to display the photo enrolled by a user or stored
in a USB disk on the screen in addition to such information as the user ID and
name.
[Operation Steps]
1. When the photo taken by the device is used, the photo can be displayed upon
successful verification.
2. To use a photo stored in a USB disk, proceed as follows:
1) Create a folder with the name of “photo” in the USB disk, and store users'
photos under this folder.
2) The user photos must be in JPG format and named after their IDs. For example,
for the user with the user ID of 154, the photo name must be 154.jpg.
3) Insert the USB disk into USB slot on the device, and select USB Disk
Management > Upload > Upload Photos. Then user photos can be displayed
upon successful verification.
?
Note:
1) The length of a user name cannot exceed 24 digits.
