iFace100 Series Product User Manual
31
RS485:
This parameter is used to enable or disable the RS485 communication. If
the RS485 communication cables are used, set this parameter to “ON”.
Baud Rate
: This parameter is used to set the baud rate for the communication
between the terminal and the PC. It includes five options: 9600, 19200, 38400,
57600, and 115200. The high baud rate is recommended for the RS232
communication to achieve high communication speed, while the low baud rate is
recommended for the RS485 communication to achieve stable lowspeed
communication.
Device ID
: This parameter is used to set the ID of device from 1 to 254. If the
RS232/RS485 communication is adopted, you need to enter the device ID on the
software communication interface.
Comm Key
: To enhance the security of attendance data, you can set a password for
the connection between the terminal and PC. Once the password is set, you can
connect the PC with the terminal to access the attendance data only after entering
the correct password. The default password is 0 (that is, no password). Once a
password is set, you need to enter this password before connecting the PC software
with the terminal; otherwise, the connection is unsuccessful. 1 to 6digit passwords
are supported.
1. Considering the massive data including the fingerprint and facial
templates stored in the terminal, it is recommended to transfer the
data between the terminal and PC over network to enhance the
transfer speed.
2.
Notice: RS485 communication function is only available on some
models.
