ZK Technology F707 User Manual Download Page 43

Page: 43 / 229

Press the

key. The F707/708 will then prompt you;

New Enroll
        Continue?

ESC                                OK

If you’d like to enroll an additional new user, then press

If you’re finished enrolling additional users, press the

ESC

key.

When pressing

ESC

, the F707/708 will prompt you;

Backup Enroll

Continue?

UserID

0001

ESC OK

If you wish to add a “backup finger” for UserID 00001 press the

key.

Note:

Ideally, we recommend enrolling one finger from each hand so that in
case of injury to one hand, the user can use the finger from the other
hand as a backup. It is recommended to enroll either index fingers
and/or middle fingers.

After enrolling one or more fingerprints to UserID 00001 press the

ESC

key.

You’ll note pressing the

ESC

key takes you back to the previous menu;

Enroll User

▼

Enroll FP
Enroll Pwd

►

FP & Pwd

Summary of Contents for F707






































































































































































































































Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands

ZK Technology F707, User Manual

Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands