ZK Technology F707 User Manual Download Page 51

Page: 51 / 229

Note:

If you press

ESC

the F707/708 will prompt you for the existing

Admin’s ID number;

Backup Enroll

UserID

00001

ESC OK

Note:

The F707/708 allows you to add up to 9 “backup” fingers.

In this first example we’ll assume we’re enrolling a fingerprint for a NEW
Admin.

Enroll FP
        New Enroll?

ESC                              OK

Since we are enrolling a New Admin, press

OK.

The F707/708 will then prompt you with the next available User ID
number;

New Enroll

UserID

00001-0

ESC OK

In this example, no Admin has yet been enrolled on the F707/708, so the
next available User ID# is 00001.

Press the

key to accept 00001, or manually key in a different number

if desired.

Summary of Contents for F707






































































































































































































































Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands

ZK Technology F707, User Manual

Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands