ZK Technology F707 User Manual Download Page 55

Page: 55 / 229

100

Remove your finger, and then place your finger on the sensor a 3

and

final time. You’ll then be prompted;

New Enroll
00001-0

ESC OK (Save)

Press the

key to accept the newly enrolled finger.

The F707/708 will then prompt you with;

New Enroll
        Continue?

ESC                                      OK

UserID 00001 has now been successfully enrolled with one fingerprint.

If you wish to continue enrolling additional Admins, press the

key and

follow the same procedures.

If you’re finished enrolling additional Admins, press the

ESC

key.

When pressing

ESC

, the F707/708 will prompt you;

Backup Enroll

Continue?

UserID

0001

ESC OK

Summary of Contents for F707






































































































































































































































Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands

ZK Technology F707, User Manual

Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands