ZK Technology F707 User Manual Download Page 49

Page: 49 / 229

Press the

key.

The F707/708 will prompt you;

Admin Accredit

Admin

ESC OK

Scroll with the

▲

▼

keys to choose the “authority status” of the Admin

you are enrolling.

3 types of “Admins” to choose from;

Enrollers:

People who are authorized

ONLY

enroll

new users or delete

users from the system. No other F707/708 “system” functions
are accessible.
.

Administrator:

People who can perform other operations, except set advanced
options and enroll administrators.

Supervisors:

People who have access to

ALL

functions.

Scroll with the

▲

▼

keys to choose the “authority status” of the Admin

you are enrolling (i.e. Enroller, Admin or Supervisor).

Admin Accredit

Admin

ESC OK

Summary of Contents for F707






































































































































































































































Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands

ZK Technology F707, User Manual

Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands