ZK Technology F707 User Manual Download Page 75

Page: 75 / 229

120

Also test the newly enrolled password;

Welcome Check-In

HH:MM

MM/DD/YY DAY

At the start-up window, have User ID 00001

FIRST

enter his/her User ID

number and

THEN

press the

key.

After entering 1 and pressing

OK,

the F707/708 will prompt;

Pwd Affirm

  Input Pwd ____

Now enter the password created by User ID 00001 and then press

OK.

If successful, the F707/708 will respond with an audible “

Thank you

”, and

the screen will display;

Verify

Pin:

00001

Verified.

Note

:
The F707/708 will make a note in its transaction log that User ID
00001 accessed the F707/708. This information can be used for
Time & Attendance software applications and/or for door access.

Summary of Contents for F707






































































































































































































































Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands

ZK Technology F707, User Manual

Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands