ZK Technology F707 User Manual Download Page 195

Page: 195 / 229

240

Press the

key.

The User Access Options screen will appear;

User Acc Opts

User ID ____

ESC OK

Press

change User ID 0001’s Door Access Options.

User 00001 Opt

▼

►

Belong to GRP 1

Use Grp TPs Y
TP1 3

Scroll with the

▲

▼

keys and place the cursor ( ) alongside the value

you wish to change.

Indicate which Group Number that User ID 00001 will belong to and if the
time zones (periods) associated with Group Number 1 will apply to User
ID 00001.

User 00001 Opt

Save ?

ESC OK (Save)

Press the

key to accept, or

ESC

to cancel and return to the previous

menu.

Access Options

▼

Define TP

►

User Acc Opts

GRP TP Define

Summary of Contents for F707






































































































































































































































Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands

ZK Technology F707, User Manual

Search results

Summary of Contents for F707

Reviews:

Related manuals for F707

Brands by name

Popular brands