SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT
75/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
The parameters for creating the list of multicast MACs are the following:
•
#.
Tabulate element identifier. Not relevant.
•
Address.
The multicast MAC address.
•
Ports.
Port/s that will transmit traffic with multicast MAC address. A group of
discreet ports is configured with the identifier of each one, separated by a comma,
without spaces. If a range is to be included, the initial and final port identifiers are
separated by a dash. The value
any
means the port is not relevant.
•
VLANs.
Numeric identifier of the VLANs defined on the equipment on which the
MAC address will be transmitted (VID fields in the
VLANs
menu). A group of
discreet vlans is configured with the identifier of each one, separated by a comma,
without spaces. If a range is to be included, the initial and final vlan identifiers are
separated by a dash. The value
all
means the vlan is not relevant. Example: in
equipment with the
vlan1
,
vlan3
and
vlan4
defined, the group of numerical
identifiers will be
1,3,4
.
The presence of identifiers in the
Ports
parameter and
VLANs
section is not
exclusive. If values for both parameters are specified, the configuration is applied
at the indicated ports that also meet the requirement of belonging to VLANs
configured.
The
trunk
type ports are considered to belong to all vlans, so it should only be
included when the
Ports
parameter has values different to
any
.
5.13.2
GMRP
The GMRP protocol is designed in order for the switches fit the multicast data transmission
based on requests issued by customers in each of the interfaces.
However, the protocol is able to manually set the transmission of multicast addresses, so
that client equipment that are not running the protocol can operate properly. This option
is performed by configuring the registers of the
Static
zone
.
