SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT
48/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
•
Mode.
This specifies the type of operation for the port in terms of speed and
operation mode.
Auto
(autonegotiation): Recommended and value by default.
10fdx
: 10 Mbit/s Full-duplex.
100fdx
: 100 Mbit/s Full-duplex.
10hdx
: 10 Mbit/s Half-duplex.
100hdx
: 100 Mbit/s Half-duplex.
If an operation mode other than
Auto
is configured, both ends of the link must
be identically configured.
For
100Base-Fx ports,
only values
100 Mbit/s Full-duplex (100fdx)
and
100 Mbit/s Half-duplex (100hdx)
have sense, so any value other than 100hdx
is processed as 100fdx.
The
SFP
interfaces
do not support changing speed
, that is to say,
they
can
operate at the speed set by the manufacturer
, so that the field value does not
affect to the operation of the SFP interfaces.
•
VID (VLAN id by default)
. VLAN numeric identifier in which the port is included. It
is also the VLAN identifier to be assigned to the frames received in the port that is
untagged, or when the tag includes only the priority (priority tagged). The VLAN
definition is selected from the
VLANs
menu, see section 5.5,
VLAN configuration
.
For the interfaces operating in QinQ Access mode, the value of this parameter
determines the VLAN identifier to be included in the most outer tag on the
interfaces with double tag, the so-called S-Tag.
