SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT
121/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
stats
This shows the equipment status parameters. These parameters are derived
from the use made of the equipment, for instance, Use of the memory of
CPU, temperature, bytes transmitted, etc.
Syntax:
drn />
stats
[
parameter
]
Arguments:
parameter
(Optional) Name of the parameter whose status is to be
consulted.
Observations:
Like the configuration parameters, these
are classified by categories, in the form of a directories
tree.
The normal use of this command is without arguments
and from the root directory; it shows all the equipment
status parameters.
To show a parameter for a specific status or those of a
specific directory, the names of each one must be known.
Once at drn/mac>, the execution of the command
stats
shows the MAC addresses identified by the switch.
Examples
:
drn />
stats
drn />
stats main
drn main/>
stats temperature
drn main/>
stats ../lan/eth0/txbytes
tail
This command is useful for monitoring the equipment and detecting potential
errors during operation. It shows the list of events stored in the log file in use
(current) and it remains to show events as they occur. It closes with
Ctrl.+C
.
Syntax
:
drn />
tail
Arguments
:
-
Without arguments, this command shows the events
recorded in the equipment non-volatile memory.
Observations
:
When this command is executed, the equipment remains
to show all the events taking place in the equipment until
the user presses the
Ctrl.
+
C
keys.
Example
:
drn />
tail
