SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT
17/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
1.5.2
Equipment safety considerations
1.
There are two power-supply models:
-
48 Vdc, isolated
-
Multirange Vdc/Vac.
When using the multirange power supply the earth connection must be made
before connecting any other power-supply cable.
In the isolated 48 Vdc model this connection is not compulsory but it is
strongly advisable.
2
. ZIV will not accept responsibility for any injury to persons or third parties,
caused by the non-fulfilment of point 1.
1.
The terminal contains components sensitive to static electricity, the following
must be observed when handling it:
-
Personnel appointed to carry out the installation and maintenance of the
switch SWT must be free of static electricity. An anti-static wristband and/or
heel connected to earth should be worn.
-
The room housing the SWT must be free of elements that can generate
static electricity. If the floor of the room is covered with a carpet, make sure
that it is anti-static.
2
. ZIV will not accept responsibility for any damage to the equipment caused by
the non-fulfilment of point 1.
