SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT
52/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
FIGURE 28
Example for using the
Overlapping Enable
parameter
4 VLANs with common ports and UNTAGGED clients = OVERLAPPING ENABLE ACTIVATED
VLANs:
The individual configuration parameters for each VLAN are:
•
#.
Indicates the position in the table.
•
Name.
A mnemonic descriptive field available to users.
•
VID.
It establishes the VLAN identifier. The admitted range goes from
1
to
4095
.
•
PRI Override.
This establishes whether the priority of the frames received in the
ports assigned to the VLAN VID should be overridden in the PRI field value
(enabled option), or whether it should be maintained (Disabled option). This field
does
NOT
affect the ports in which the VLAN function parameter is configured as
trunk.
•
PRI.
If the
PRI Override
option is enabled, the original priority of the frames
received
with a
tag
will be modified with the established value.
