ZIV SWT, User Manual

Page: 109 / 137

SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT
109/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
B.2 USER CONSOLE COMMANDS
After starting the session with a valid login and password, the prompt will change to
equipment /> waiting for the user to enter a command.
The commands are instructions sent to the equipment to request or change a value or to
“browse” through the tree in which the equipment parameters are organised.
The following table shows a full list of available commands with a brief description of each
one and their availability depending on the type of user starting the session, highlighting the
most useful ones:
TABLE 2 Full list of CLI user console commands
Command Description
User
admin guest
add Adds a new item to a matrix-type parameter
✓ 
apply Applies the new configuration
✓ 
cd Changes the directory in the parameters tree
✓ ✓
clear Deletes the statistics
✓ 
date Shows the date stored in the equipment
✓ 
download Generates a configuration commands file
✓ ✓
exit Interrupts the connection with the equipment
✓ ✓
get Shows the parameter values
✓ ✓
help Shows the list of available commands
✓ ✓
log Shows the log file in use
✓ ✓
ls Shows the lists of available parameters in the current directory
✓ ✓
ping Sends a ping to the indicated host
✓ ✓
quit Interrupts the connection with the equipment
✓ ✓
reboot Reboots the equipment
✓ 
reload Loads a previously-saved configuration
✓ 
remove Eliminates an item from a matrix-type parameter
✓ 
restore Loads a default configuration
✓ 
save Saves all the changes made during the session
✓ 
set Modifies the value of a parameter
✓ 
show Equivalent to the log command and also allows the query of old
log files by specifying the filename as a parameter
✓ ✓
stats Shows the equipment status
✓ ✓
tail Shows the list of events stored in the log file and it remains to
show events as they occur. It closes with Ctrl+C.
✓ ✓
telnet Open a telnet session without interrupting the connection with
the equipment
✓ ✓