manualshive.com logo in svg

ZIV SWT, User Manual

Share
Download
ZIV SWT User Manual Download Page 128

SWT

 

GIGABIT/FAST ETHERNET SWITCH TYPE SWT 

128/137

 

USER GUIDE - M0SWTA1903Iv09 -  V09  March 2019 

8- 

Example  of  a  list  showing  the  status  of  an  equipment  obtained  with  the  get 

command and saved in a .txt file 

 

swt login: guest 
Password: 
 
swt /> get 
/ 
main/ 
      hostname       = l2-0.20-3.31-lite2                                                                         
      location       = unknown                                                                                    
      contact        = unknown                                                                                    
      product        = 3SWTES001NM300AM                                                                           
      version        = 3.31.14.42186                                                                              
      fw_reference   = 4WF72030000-R013                                                                           
      trackingnumber = 00001888b5d9                                                                               
      serialnumber   = 1000000                                                                                    
      guestlogin     = guest                                                                                      
      guestpwd       = 
tH4sIADaCD1wCAzM0AAPtgsTi4vIUA0MAkoosAhAAAAA5M2NlNmFiN2I0MzA2UZDk0ZTE3YzM3YjU0ZjQ3Y2UwZgo= 
      adminlogin     = admin                                                                                      
      adminpwd       = 
tH4sIADaCD1wCAzM0AAPtgsTi4vIUAyMAKNslmxAAAABlMjRiMWM4NmNkMWI3UZDhlMWQyNDY5OWZiMWE3NWUyMAo= 
      timezone       = Madrid                                                                                     
      time           = 2018/12/11,09:24:06                                                                        
      localtime      = 2018/12/11,10:24:06                                                                        
   admin/ 
      web/ 
         http          = on                                                                             
         httpport      = 80                                                                             
         https         = off                                                                            
 
 
Press any key to continue or CTRL+C to stop. [A 
 [J         httpsport     = 443                                                                            
         cert          = empty                                                                          
         privatekey    = empty                                                                          
         privatekeypwd = tH4sIADaCD1wCAzM0AANtAHFEx4YIAAAANDI5OTM3YzMyN2VmYjU4MTc2NjM3MMmY1OWJlMWNiOGQK 
      cli/ 
         syslog_level        = 8       
         syslog_level_remote = 4       
         syslog              = off     
         syslog_server       = 0.0.0.0 
   eth0/ 
      static         = off               
      ip             = 10.212.0.36       
      mask           = 255.255.254.0     
      vlanid         = 1                 
      dgw            = 10.212.1.254      
      mac            = 02:E0:AB:01:33:40 
      swt_int_mode   = Interrupt_mode    
      swt_int_devnum = 0                 
   qinq/ 
      stag = 0x88A8 
   vlanoverlapping/ 
      enable = off 
 
 
Press any key to continue or CTRL+C to stop. [A 
 [J   vlan[]/ 
      [vlan] name      vid priover priority 
      ------------------------------------- 
      1      vlan_name 1   off     0        
      2      vlan_name 10  off     0        
   port[]/ 
      [port] name     enable vlan_function mode vid vid_acl lag  lag_config 
      --------------------------------------------------------------------- 
      1      e1       on     edge          auto 1   auto    none off        
      2      e2       on     edge          auto 1   auto    none off        
      3      e3       on     edge          auto 1   auto    none off        
      4      e4       on     edge          auto 1   auto    none off        
      5      e5       on     edge          auto 1   auto    none off        
      6      e6       on     edge          auto 1   auto    none off        
      7      e7       on     edge          auto 1   auto    4    on         
      8      e8       on     edge          auto 1   auto    4    off        
      9      swt-port on     edge          auto 1   auto    none off        
      10     swt-port on     edge          auto 1   auto    none off        
      11     swt-port on     edge          auto 1   auto    none off        
      12     swt-port on     edge          auto 1   auto    none off        
      13     swt-port on     edge          auto 1   auto    none off        
      14     swt-port on     edge          auto 1   auto    none off        
 
 
Press any key to continue or CTRL+C to stop. [A 
 [J      15     swt-port on     edge          auto 1   auto    none off        
      16     swt-port on     edge          auto 1   auto    none off        
      17     swt-port on     edge          auto 1   auto    none off        
      18     swt-port on     edge          auto 1   auto    none off        
      19     swt-port on     edge          auto 1   auto    none off        
      20     swt-port on     edge          auto 1   auto    none off        
      21     swt-port on     untag         auto 1   auto    none off        
      22     swt-port on     edge          auto 1   auto    none off        
      23     swt-port on     edge          auto 1   auto    none off        
      24     swt-port on     edge          auto 1   auto    none off        
   qos/ 
      weightfair_enable = on 
      priority[]/ 
         [priority] queue  
         ----------------- 
         0          medium 
         1          medium 
         2          medium 
         3          medium 
         4          medium 
         5          medium 
         6          medium 
 
 
 

Summary of Contents for SWT










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands