SWT
GIGABIT/FAST ETHERNET SWITCH TYPE SWT
84/137
USER GUIDE - M0SWTA1903Iv09 - V09 March 2019
5.15.2
MAC list
This submenu permits the authorized client MAC address list to be specified. The list may
or may not be activated in each port through the
Security type
parameter.
The parameters for creating the MACS list are the following:
•
#.
Tabulate element identifier. Not relevant.
•
Address.
The client MAC address entered in the list. If a range is desired to be
included, the initial address and final address are separated by a hyphen (see
example in the figure).
•
Ports.
Port/s in which the MAC address will be accepted. A group of discreet ports
is configured with the identifier of each one, separated by a comma, without
spaces. If a range is to be included, the initial port identifier and final port identifier
are separated by a dash. The value
any
means the port is not relevant.
•
VLANs.
Numerical identifier of the VLAN defined in the equipment in which the
MAC address will be accepted (VID fields in the
VLANs
menu). A group of discreet
ports is configured with the identifier of each one, separated by a comma, without
spaces. If a range is to be included, the initial and final vlan identifiers are
separated by a dash. The value
all
means the vlan is not relevant. Example: in
equipment with a
vlan1
,
vlan3
and
vlan4
defined, the group of numerical identifiers
will be
1,3,4
.
The presence of identifiers in the
Ports
parameter and
VLANs
section is not
exclusive. If values for both parameters are specified, the configuration is applied
at the indicated ports that also meet the requirement of belonging to VLANs
configured.
FIGURE 47
MAC list
submenu configuration page
