SIP-2
79/145
USER GUIDE - Rev. 3 (January 2018)
The configuration parameters are:
•
Enable:
Enables/disables the execution of the SNMP agent. The agent is operative
when the option is selected.
•
Community:
Parameter associated with SNMPv1/v2c. Tabulate information that
allows several operating profiles to be defined, including the rights of access
(Access) associated with each one, read only rights (
ro
) or reading/writing rights
(
rw
). The profiles are called
communities
.
•
User:
Parameter associated with SNMPv3. Tabulate information that allows the
users, including the privileges and the operating mode associated with each user,
to be defined. That is to say, the rights of access (Access), read only rights (
ro
) or
reading/writing rights (
rw
), and the way in which the data transference (Security)
will be carried out, without encryption (
clear
), authentication (
auth
) or authentication
and encryption (
priv
).
In case of authentication transmission (
auth
), it is necessary to select the type of
algorithm (
Auth Alg
.), MD5 or SHA, and establish the authentication password
(
Auth
Password
). The password establishes the word to be used to generate the
authentication information. The authentication word must be known by the receiver
in order to be able to verify the authenticity of the identity of the transmitter.
In case of encrypted transmission (
priv
), in addition to select the type of
authentication algorithm (
Auth Alg
.) and authentication password (
Auth Password
),
it is necessary to select the cipher algorithm (
Priv Alg
.), DES o AES, and establish
the cipher password (
Priv Password).
The password is not shown for security reasons and so when it is changed
(
Change
option), it must be entered twice.
Once the
Password
is introduced from the
Change
option, execute the
send
command of said option, and then, if you want the password to be applied and
saved in the equipment,
DO NOT forget
to execute the
apply
and
save
commands from the main menu tree.
