SIP-2
132/145
USER GUIDE - Rev. 3 (January 2018)
B.3
OBTAINING INFORMATION ABOUT THE STATUS AND
CONFIGURATION OF A EQUIPMENT
To obtain information about the status and configuration of equipment, proceed as follows::
1-
Connection with the equipment
As explained in chapter
B.1
, the equipment connection differs slightly depending on
the chosen method. In this example, it is assumed that the equipment is a
DRA-2
,
connected to a network and with an IP address configured, which in the case of this
example will be 111.222.0.123. In addition the computer used to make the connection
is also connected to that network and the O.S. used is
Windows XP
©
.
To establish the connection through
Telnet
, click on the
Windows XP
©
Start
button
and once the menu has appeared, click on the command
Execute
. In the window that
appears, enter “
telnet 111.222.0.123
” (without inverted commas) and then press
Accept.
If everything is functioning normally, a window will pop up with a system symbol, which
is the interface for the connection.
