SIP-2
118/145
USER GUIDE - Rev. 3 (January 2018)
In operating systems like Microsoft Windows 7©, the Telnet client is disabled by default.
To enable it, from the Start button:
Start
Control
panel
All Programmes
, in
Programs
and characteristics
, select
Activate or deactivate the Windows characteristics.
Then, in the window of
Characteristics of Windows
, select
Telnet client
, see FIGURE 65.
By pressing
Accept
, the Telnet client of Windows may be used.
FIGURE 65
Window of characteristics of Windows
B.2
USER CONSOLE COMMANDS
After starting the session with a valid login and password, the prompt will change to
equipment />
waiting for the user to enter a command.
The commands are instructions sent to the equipment to request or change a value or to
“browse” through the tree in which the equipment parameters are organised.
The following table shows a full list of available commands with a brief description of each
one and their availability depending on the type of user starting the session, highlighting the
most useful ones:
