36
UC5e IM Rev 2-1 July 2004
6.
Mount the three 45mm standoffs [D] into the holes.
Note:
Tighten these standoffs with a flat screwdriver.
7.
Locate the mounting plate [E]. Orientate the plate correctly, as shown.
8.
Attach five M3 x 6mm screws [F] on the mounting plate, then attach four
M3 x 10mm male to female standoffs [G] and one M3 x 10mm standoff
[H].
Note:
There are three different size holes on the mounting plate. Use 4 of the 6
small tapped holes, and other holes are not used.
[D]
[E]
[F]
[G]
[H]
