32
UC5e IM Rev 2-1 July 2004
15.
Mount the keypad PCB [A], part no. VU5E 10 005 onto the standoff on
the right and secure with a M3 x 6mm screw [B] supplied.
16.
Locate the 8 pin ribbon cable [C], part number VU5E 10 002. Connect
the white pin connector end to the upright connector on the keypad
PCB and the loose 4 x 2 pin connectors onto the UC5E main board.
NOTE:
Connectors 1& 4 are sensitive to polarity. These connectors should be
plugged in with the viewable pin sides (2 x gold coloured pins) facing
outwards and the solid sides facing each other.
Figure 3g
[A]
[B]
[C]
