INSTRUCTION MANUAL CENTRAL COMMAND STATION MX10, MX10EC Page39
THIS FUNCTION IS NOT YET IMPLEMENTED - THIS IS A DESCRIPTION OF THE PROJECT
THIS FUNCTION IS NOT YET IMPLEMENTED - THIS IS A DESCRIPTION OF THE PROJECT
8.9
Insert flash drive with files to update decoder software
or load sounds
To copy into the “file storage” or to carry out directly
Starting point normal screen
BLUE
Insert flash drive (possible from every operation state; with files in the root directory for decoder
software update, and/or to load sound)
Display colour changes to
TURQUOISE
, list of files
stored on the flash drive is shown (first
if necessary an update for the MX10, then the files for
the decoder).
Select desired file (and thereby also action) per rotary knob.
Press rotary knob
If a decoder software collection file (.zsu) is selected,
it is copied to the
file memory.
If a sound project (.zpp) is selected,
the file is copied to the
file memory.
From this file memory, decoders can be updated later or load sound, see chapter 8.10.
OR (instead of pressing rotary knob)
Press Button
1
(
) or
Button2 (MENU)
Immediate start of the
Decoder updates or loading
sound.
Further information see chapter 8.10
In case, no selection was made beforehand, and
the flash drive contains several .zsu-files (software update) or .zpp-files (sound projects):
- the file added last to the flash drive is used.
- if used for several decoders, connected one after the other: the same file.
HOW THE UPDATE OF THE DECODER (OR LOADING SOUND) IS DONE
SEE CHAPTER 8.10
8.10
Decoder Update and Sound loading;
directly from the flash drive or the MX10’s file memory
Starting point normal screen
BLUE
EITHER (from the flash drive)
(Flash drive)
flash drive
with decoder software collection file and/or sound projects (see chapter 8.9)
Display colour changes to
TURQUOISE
and lists the found files
OR (from the file memory)
Starting point (also) normal screen
BLUE
no flash drive
is inserted, take decoder update or sound pro-
ject files from then
file memory
(described in chapter 8.9 how
those files are entered into this file memory).
HOW DECODER UPDATES ARE DONE:
As soon as the decoder (or a vehicle with a decoder) is con-
nected to the update track (track 2),
(this can be done before or after a specific files is selected), a
line with the decoder data is displayed (type, current SW ver-
sion)
Scroll with rotary knob (if various files are displayed): Cur-
sor (
) to desired file
Press rotary knob
information to selected file (version)
and decoder is shown.
Press rotary knob (again)
run software update.
After about 10 sec. the update is finished,
Display shows a 100% bar
GREEN
.
Z IM O M X 6 4 5 S W 3 0 .0 6
D E C - U P D A T E A d r. 1 0 1 6
S a m m e lfile x y z .z s u
Sammelfilexyz.zsu
► Sammelfile1234.zsu
Soundprojektabc.zpp
Sammelfilexyz.zsu
►
Sammelfile1234.zsu
Soundprojektabc.zpp
Sammelfilexyz.zsu
► Sammelfile1234.zsu
Soundprojektabc.zpp
ZIMO MX645 SW 30.06
► Sammelfile1234.zsu
Soundprojektabc.zpp
.
ZIMO MX645 SW 30.06
DEC-UPDATE 1016
Sammelfilexyz.zsu
