INSTRUCTION MANUAL CENTRAL COMMAND STATION MX10, MX10EC Page13
A bigger arrangement with StEin, computer and various controllers:
Such an own power supply unit and this circuit should always be used, if
more than 5
StEin modules
(with
MX10
) or
more than 1 StEin module
(with
MX10EC
) are used.
Only in smaller applications is it advisable to use the accessory voltage for the StEin
(which also covers the internal consumption of the modules) from the "DC-out" output S2
of the MX10 or 12 V of the MX10EC.
A multiMAUS (or several MAUSES) cannot be connected to the same
XpressNet (XNET) at the same time, because there are differences in
the protocol.
If simultaneous use is desired, both XpressNets must be used at the
socket: either by manufacturing the necessary cable yourself or by us-
ing the "connection and distribution board" MX10AVP (see relevant
chapter).
See also chapter "The MX10 MENU", item "Bus Monitor.
