Zimmer Z Lipo, Instructions For Use Manual, Page: 17 / 36

Basic settings
6
Page 9
Start-up screen
Self test
After turning it on, the Z Lipo performs a self-test. During the test, the current status
of the pre-cooling can be read.
Choice of applicator If pre-cooling is complete, the left, right or both (dual) applicators can be selected.
Note: Treatment can, depending on the treatment area, be performed with just one
applicator (left or right) or with two applicators simultaneously.
Note: The programme specifications and any changes are identical for each of the 3
possible choices, so the steps below are only explained with reference to the
treatment with the left applicator.
The selected applicators (left, right or dual) are displayed in orange.