Zimmer Z Lipo, Instructions For Use Manual, Page: 11 / 36

Application information
2
Page 3
Treatment with ZLipo Inspect the device before use. If there is any damage, do not use the device. Ensure
that the handpieces are clean inside and outside. Particular attention must be paid to
the peltier elements and the vacuum hole.
Clean and disinfect the handpieces before each treatment.
The user can customise the programme settings according to the patient's fat and
skin condition. The automatic mode is preset with proven specifications. However,
the user can adjust the settings to the patient's condition.
The treatment parameters can be defined individually. The Auto mode is preset with
treatment recommendations. Depending on the patient's condition, these parameters
can be adjusted.
The treatment results may vary.
The cooling fleece is essential and must be used for each treatment.
Always use a cooling fleece - not only to increase effectiveness, but also to protect
the treated area.
Do not change the temperature during treatment.