Transparent bridging
Z-Edge 64 Configuration Guide
75
2
Set up bridged encapsulation over AAL5 by setting the
vcc_aal5_encaps_type parameter in the atm-vcl profile to other:
zSH> update atm-vcl 1-1-1-0-hdsl2/atm/0/35
Please provide the following: [q]uit.
vpi: -----------------------------> {0}: ** read-only **
vci: -----------------------------> {35}: ** read-only **
admin_status: --------------------> {down}:
receive_traffic_descr_index: -----> {1}:
transmit_traffic_descr_index: ----> {1}:
vcc_aal_type: --------------------> {aal5}:
vcc_aal5_cpcs_transmit_sdu_size: -> {9188}:
vcc_aal5_cpcs_receive_sdu_size: --> {9188}:
vcc_aal5_encaps_type: ------------> {llcencapsulation}: other
vcl_cast_type: -------------------> {p2p}:
vcl_conn_kind: -------------------> {pvc}:
fault-detection-type: ------------> {disabled}:
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.
3
Bring the VCL back up:
zSH> update atm-vcl 1-1-1-0-hdsl2/atm/0/35
Please provide the following: [q]uit.
vpi: -----------------------------> {0}: ** read-only **
vci: -----------------------------> {35}: ** read-only **
admin_status: --------------------> {down}: up
receive_traffic_descr_index: -----> {1}:
transmit_traffic_descr_index: ----> {1}:
vcc_aal_type: --------------------> {aal5}:
vcc_aal5_cpcs_transmit_sdu_size: -> {9188}:
vcc_aal5_cpcs_receive_sdu_size: --> {9188}:
vcc_aal5_encaps_type: ------------> {other}:
vcl_cast_type: -------------------> {p2p}:
vcl_conn_kind: -------------------> {pvc}:
fault-detection-type: ------------> {disabled}:
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.
4
Create bridge profiles for both ends of the connection—one for DSL
(WAN) and for Ethernet (LAN). The Zhone interface type for bridged
encapsulation is bridge.
zSH> new bridge-interface-record 1-1-1-0-hdsl2/bridge
Please provide the following: [q]uit.
vpi: ----------------> {0}:
vci: ----------------> {0}: 35
portGroupIndex: -----> {0}:
stpenabled: ---------> {false}:
bridgefilterindex: --> {0}:
bridgeLowerIfIndex: -> {0}: 1
....................
