System configuration
32
Z-Edge 64 Configuration Guide
CLI provisioning and ZMS
Note:
For details on using ZMS, refer to the ZMS Administrator's
Guide and the NetHorizhon User's Guide.
CLI configuration of a device being managed by the ZMS is disabled by
default. Attempting to configure the device results in an error:
zSH> update system 0
Provisioning via CLI is currently not available.
If you need to configure the device from the CLI, use the resetcliprov
command.
If you plan to use a script to provision the device from the CLI while it is
being managed by the ZMS:
1
Update the system profile to disable partial config syncs to ZMS:
zSH> update system 0
Please provide the following: [q]uit.
syscontact: ----------> {Zhone Global Services and Support 7001 Oakport
Road Oakland Ca. (877) Zhone20 (946-6320) Fax (510)777-7113
sysname: -------------> {Z-Edge}:
syslocation: ---------> {Oakland}:
enableauthtraps: -----> {disabled}:
setserialno: ---------> {0}:
zmsexists: -----------> {true}: false
zmsconnectionstatus: -> {inactive}:
zmsipaddress: --------> {192.168.210.28}:
configsyncexists: ----> {false}:
configsyncoverflow: --> {false}:
configsyncpriority: --> {high}:
configsyncaction: ----> {noaction}:
configsyncfilename: --> {192.168.94.226_4_1014067321329}:
configsyncstatus: ----> {synccomplete}:
configsyncuser: ------> {cfgsync}:
configsyncpasswd: ----> {}: ** private **
numshelves: ----------> {1}:
shelvesarray: --------> {}:
numcards: ------------> {3}:
ipaddress: -----------> {192.168.8.21}:
alternateipaddress: --> {0.0.0.0}:
countryregion: -------> {us}:
primaryclocksource: --> {0/0/0/0/0}:
ringsource: ----------> {internalringsourcelabel}:
revertiveclocksource: -> {true}
voicebandwidthcheck: --> {false}
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.
2
After the provisioning is complete, perform a full config sync from ZMS.
