Configuring voice communications
Z-Edge 64 Configuration Guide
59
zSH> list subscriber-voice-aal2
subscriber-voice-aal2 2
subscriber-voice-aal2 4
subscriber-voice-aal2 6
Subscriber-voice endpoint profiles
After the subscriber-voice profiles have been created, you must update the
subscriber voice endpoint profiles. On Z-Edge 64 H2A systems, there is the
subscriber-voice-aal2 profile on the network side and the
subscriber-voice-pots profiles on the subscriber side. On Z-Edge 64 BH2A
systems, there is the subscriber-voice-aal2 profile on the network side and
the subscriber-voice-isdn profile on the subscriber side.
POTS
Update the subscriber voice endpoint profile for the network side of the
connection:
zSH> update subscriber-voice-aal2 2
voice-endpoint1-addr-index from subscriber-voice profile
Please provide the following: [q]uit.
voice-aal2-line-group-id: -> {}: 12
line group ID of WAN interface
voice-aal2-vpi: -----------> {}: 0
VPI defined in atm-vcl profile
voice-aal2-vci: -----------> {}: 37
VCI defined in atm-vcl profile
voice-aal2-cid: -----------> {}: 16
CID defined in aal2-cid-profile
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.
Update the subscriber voice endpoint profile for the subscriber side of the
connection. Use the linegroup command to get the ifIndex value for the
POTS interfaces on the Z-Edge 64 H2A:
zSH> linegroup 1-1-3-0/voicefxs
lineGroupId: 4
Modify the following parameter in the subscriber-voice-pots profile to
enable POTS subscriber-side endpoints:
zSH> update subscriber-voice-pots 1
Please provide the following: [q]uit.
voice-pots-line-group-id: -> {0}: 4
ifindex for the line
....................
Save new record? [s]ave, [c]hange or [q]uit: s
New record saved.
Parameter
Description
voice-pots-line-group-id
The line group identifier for the POTS
line, equal to the ifindex of the line.
The default value is 0.