Configuring voice communications
Z-Edge 64 Configuration Guide
55
POTS
Use the linegroup command to get the line group identifier value for the
WAN interface on the Z-Edge 64 H2A:
zSH> linegroup 1-1-1-0/hdsl2
lineGroupId: 12
The following example configures a subscriber record with a subID of 1
(which is user-defined) and a lineGroupId of 12 (which is the linegroupID of
the WAN port):
zSH> new subscriber 1/12
Please provide the following: [q]uit.
id: ----------------------> {0}: 1
line-group-id: -----------> {0}: 12
name-group-id: -----------> {}:
service-provider-id: -----> {0}:
iad-type: ----------------> {NONE(0)}: zedge64s
line-rate-limit: ---------> {0}: 64000
for a 64kbps voice line
capable-line-rate-limit: -> {0}: 64000
for a 64kbps voice line
....................
Save new record? [s]ave, [c]hange or [q]uit: s
New record saved.
ISDN
Use the linegroup command to get the line group identifier value for the
WAN interface on the Z-Edge 64 BH2A:
zSH> linegroup 1-1-1-0/hdsl2
lineGroupId: 4
The following example configures a subscriber record with a subID of 1
(which is user-defined) and a lineGroupId of 4 (which is the linegroupID of
the WAN port):
ZSH> new subscriber 1/4
Please provide the following: (q=quit)
id: ------------------------>[0]: 1
line-group-id: ------------->[0]: 4
name-group-id: ------------->[]: oak
service-provider-id: ------->[0]:
line-rate-limit
The maximum line rate (in bits per
second) that the subscriber is
provisioned to receive from the service
provider. This value is the total line
rate or bandwidth of the subscriber
connection, including voice and data.
capable-line-rate-limit
The line rate capability.
Parameter
Description
