Zhone Z-Edge 64, Configuration Manual

Page: 29 / 122

Z-Edge 64 Configuration Guide
29
3
S
YSTEM CONFIGURATION
This chapter details how to configure system-wide settings of the Z-Edge 64.
It includes the following topics:
•
System defaults, page 29
•
Configuring a connection to the ZMS, page 30
System defaults
When the Z-Edge 64 is turned on, several profiles are automatically
configured. Here are some of the Z-Edge 64 default configurations:
•
The Z-Edge 64 is set up as a DHCP client in the ip-interface-record for
the WAN port of the system.
•
The Ethernet (LAN) interface is 10/100 Mbps autosensing,
autonegotiating.
•
The DSL (WAN) interface is set to SDSL, customer premises equipment,
with a line speed of 1552kbps.
•
The Virtual Path Indicator (VPI) and Virtual Channel Identifier (VCI)
values for the WAN interface: VPI/VCI = 0/35.
The Z-Edge 64 automatically creates ip-interface-record, atm-traf-descr
record and atm-vcl profiles for the WAN interface when the Z-Edge 64 is
turned on. These three profiles enable ATM traffic over IP on the WAN port.
Enter get commands to view these default profiles:
zSH> get ip-interface-record 1-1-1-0/ip
vpi: ---------------> {0}
vci: ---------------> {35}
rdindex: -----------> {1}
dhcp: --------------> {client}
addr: --------------> {0.0.0.0}
netmask: -----------> {0.0.0.0}
bcastaddr: ---------> {0.0.0.0}
destaddr: ----------> {0.0.0.0}
farendaddr: --------> {0.0.0.0}
mru: ---------------> {1500}
reasmmaxsize: ------> {0}
ingressfiltername: -> {}
egressfiltername: --> {}