Configuring voice communications
Z-Edge 64 Configuration Guide
53
frame-mode-data: ----> {disabled}:
cas: ----------------> {enabled}:
pcm-encoding: -------> {mulaw}:
max-length-frame: ---> {65535}:
max-sdu-length: -----> {1536}:
ras-timer: ----------> {0}:
preferred-ap-index: -> {1}:
ATM Forum specified audio profile index
....................
Save new record? [s]ave, [c]hange or [q]uit: s
New record saved
ISDN
For ISDN, create a aal2-cid-profile for the D channel. The B channels’ CIDs
will be automatically generated once the D channel aal2-cid-profile is saved.
Then update the aal2-cid-profiles to configure the B channels.
First, create a new aal2-cid-profile for the D channel using one of the ATM
Forum-specified CIDs:
zSH> new aal2-cid-profile 1-1-1-0-hdsl2/atm/0/37/128
Please provide the following: [q]uit.
admin-status: -------> {down}: up
sscs-type: ----------> {i3662}: i3661
for D channels
audio-service: ------> {enabled}:
frame-mode-data: ----> {disabled}: enabled
cas: ----------------> {enabled}: disabled
pcm-encoding: -------> {mulaw}: alaw
max-length-frame: ---> {65535}:
max-sdu-length: -----> {1536}:
ras-timer: ----------> {0}:
preferred-ap-index: -> {1}:
ATM Forum specified audio profile index
....................
Save new record? [s]ave, [c]hange or [q]uit: s
New record saved
After saving the new aal2-cid-profile for the ISDN D channel, the
aal2-cid-profiles for the associated ISDN B channels are automatically
created. You can see the aal2-cid-profiles created for the B channels by
issuing a list command:
zSH> list aal2-cid-profile
aal2-cid-profile 1-1-1-0-hdsl2/atm/0/37/128
aal2-cid-profile 1-1-1-0-hdsl2/atm/0/37/160
aal2-cid-profile 1-1-1-0-hdsl2/atm/0/37/161
Modify the aal2-cid-profiles that have been automatically created for the
ISDN B channels to match the pcm-encoding of the aal2-cid-profile for the
D channel:
zSH> update aal2-cid-profile 1-1-1-0/atm/0/37/160
Please provide the following: [q]uit.
admin-status: -------> {up}:
sscs-type: ----------> {i3662}:
this is for B channels