Zhermack QUASAR, User Manual, Page: 138 / 296

QUASAR/QUASAR PLUS
138 of 296
MAINTENANCE AND USE MANUAL
EN
CHAPTER 8: DESCRIPTION OF THE QUASAR PLUS
8.1
DESCRIPTION OF THE QUASAR PLUS
8.2
TABLE OF QUASAR PLUS COMPONENTS
the electronic module (plus module) inserted on the machine allows spot-welding, with plasma
technology, of the prosthetic materials to be joined. the new method eliminates the lining set-up
phase of the pieces to be welded. In practical terms it allows welding to be carried out in a fraction of
the time, thus making the system simpler, faster, easily repeatable and, above all, easy to learn.
Compared to the Quasar, then, the Quasar plus has a foot control, a crocodile clip (to connect the
earth) and a handpiece where the welding electrode is mounted (made of the same material as the
pieces to be joined together).
A. power/spot-welding regulator
B. Handpiece
C. Welding electrode
D. Foot control
E. Crocodile clip
F. 8x6 pipe connector (for argon)
G. 8x6 pipe (optional)
H. ARGON bottle
(image is illustrative only)
I. N° 3 Cr/Co electrodes Ø8 for ceramic
L. Transparent pocket
M. Material info label
The Plus module is supplied as standard on Quasar plus models. It can, however, be
fitted (at the rear on the upper part) on Quasar welders purchased previously.
Contact the Authorised Assistance Centre.
8.2.1 Description of Quasar plus components
WARNING: THE ARGON GAS NEEDED FOR UTILISATION OF THE QUASAR PLUS IS NOT
SUPPLIED AND MUST BE PROVIDED BY THE USER.
PRESSURE RANGE: MIN 2 BAR - MAX 3 BAR.