Zhermack QUASAR, User Manual, Page: 130 / 296

QUASAR/QUASAR PLUS
130 of 296
MAINTENANCE AND USE MANUAL
EN
6.5
STARTING UP THE MACHINE
6
X 100
7
8
9
°C
10
11 12 13
4
12
Figure
3
Fig. 3: Before doing any welding and before
switching on the welder position the refractory platform
(12) on the surface working plate (4).
9
Figure
4
Fig. 4: Connect the welder plug (9) to the power supply
socket.
The power supply must be 230 V~ ±10% 50/60 Hz.
Make sure that there is an effective earth connection and
observe the relevant standards.
6
X 100
7 8
9
°C
10
11 12 13
Figure
1
Fig. 1: place the welder evenly on the worktop (see
paragraph 4.2.1).
Figure
2
Fig. 2: Use the side handles (11) to raise the
protective screen (5) and gain access to the worktop.
It is forbidden to tamper with the power
lead and the plug.