Zhejiang Qianjiang Motorcycle RKV 200, Service Manual, Page: 8 / 171

8
Length of bolts and screws are different for assemblies and protecting
plates. They shall be installed at correct positions. If confused, just
put the bolt inside the hole and see if it matches.
Fill lubricating grease into the groove during oil seal installation.
Check if the oil seal is smooth and if it is possible to be damaged
when installed.
Installation of rubber hose (fuel, vacuum, or coolant): insert its
end into bottom of connector so that there is enough room for
the hose clamp to grip the connector. Install the rubber or plastic
dustproof boot back to its originally designed position.
Disassembly of ball bearing: use a tool to push against one or
two (inner and external) bearing races. If the force works only
on one bearing race (whatever inner or external), the bearing
may be damaged when disassembled and it must be replaced.