Zhejiang Qianjiang Motorcycle RKV 200, Service Manual, Page: 29 / 171

29
Yes
No
Yes
Yes
No
Yes
No
No
Difficult gearshift on transmission
Start engine and check if idle is too high.
Readjust Check if the operation is harmonious at gearshift.
Check if cluth is completely separated. Improve operation method.
Check if gearshift box is distorted and shift lever is deformed or overworn. 1. Check if clearance of clutch handle bar is
within 10mm~20mm; 2. Check if elasticity of
clutch spring is even; 3. Check if splines on
clutch active and drive hubs are worn into
zigzag form; 4. Check if clutch driven plate is
warping and distorted; 5. Check if
components of clutch control mechanism are
excessively worn.
Replace 1. Check if groove of gearshift
camshaft is over worn or injured; 2.
Check if shift fork hole is excessively
worn; 3. Check if shift fork is
deformed; 4. Check if fork shaft is
distorted or overworn.