ZF CruiseCommand 785CE, Installation And Troubleshooting Manual

Page: 14 / 160

OPERATION
Page 6
2.7 H
IGH
/ L
OW
I
DLE
M
ODES
The CruiseCommand Control System offers two options of engine
IDLE RPM settings.
• Low Idle Mode (default setting)
• High Idle Mode. (an adjustable elevated Idle RPM)
2.7.1 Low Idle
Low Idle is the normal engine Idle RPM.
When the System is initially powered up, it will always command Low
Idle.
2.7.2 High Idle
A High Idle RPM may be programmed during Set-up. The High Idle
maximum setting is 20% of full throttle.
2.7.3 Selecting Between High / Low Idle
To select between Low and High Idle (or vice versa) at the Station-in-
Command: (refer to Figure 6:)
A) The Control Head levers may be in any position.
B) Depress and hold the transfer button for 1/2 second and then
release.
• If the System was in Low Idle it will toggle to High Idle and vice
versa.
C) To return to the previous Idle setting, depress and hold the transfer
button again for 1/2 second and then release.
Figure 6: High/Low Idle Mode Selections