ZF CruiseCommand 785CE, Installation And Troubleshooting Manual

Page: 135 / 160

Throttle Testing TRAIN-157 Rev.B 6/01
Page 38
F) Plug the test leads into the Test Unit as shown in Figure 31: The
appropriate Idle current for the application should be measured. If
the current is off slightly, it may be adjusted using the “Throttle
Minimum” function.
G)Move the Control Head lever to the Full Throttle position while
depressing the Transfer Button.
H)Depress and hold the “mA Jumper” switch on the Test Unit while
monitoring the current as shown in Figure 32:. If the appropriate
current for the application is off slightly, it may be adjusted by
using the Throttle Maximum "
E3 " Function.
I) Return the Control Head lever to the Neutral/ Idle position and
turn power ‘Off’ to the Processor.
J) Remove the Test Unit and plug the Throttle Harness back into the
Processor’s Throttle Socket.
Figure 32: Dwg 11653-D