2. DIRECTIONS FOR USE
© Copyright 2008 ZEVEX Incorporated
15
The Battery
Charging the Battery
To charge the battery, insert plug from
AC
Adapter/Charger into port on the left side of
pump. Plug charger into a wall outlet.
Pump will charge whether it is turned off or
running.
When charger is plugged in and charging, the
plug symbol will appear in the display and the
fuel gauge will display four bars scrolling from
E to F. This pattern continuously repeats while
pump is charging (
Figures 2-18a through 2-
18e
). When bars stop scrolling pump is done
charging.
To check the status of battery during charg
-
ing, disconnect charger from pump and turn
on pump.
NOTE: If pump shut down due to low battery,
charging less than 10 minutes may result in an
ER99 alarm. Fully charge battery if depleted
(
see page 20 to clear alarm
).
a
b
c
d
e
Figure 2-18 Fuel Gauge