Intelligent Radio Interface Module
4
025-9623 D3
Safety Summary
STOP
Warning!
For your safety and the protection of the equipment, observe these
precautions when installing or servicing Zetron equipment.
•
Follow all warnings and instructions marked on the equipment or included in documentation.
•
Only technically qualified service personnel are permitted to install or service the equipment.
•
Be aware of and avoid contact with areas subject to high voltage or amperage. Because some
components can store dangerous charges even after power is disconnected, always discharge
components before touching.
•
Never insert objects of any kind through openings in the equipment. Conductive foreign
objects could produce a short circuit that could cause fire, electrical shock, or equipment
damage.
•
Remove rings, watches, and other metallic objects from your body before opening
equipment. These could be electrical shock or burn hazards.
•
Ensure that a proper electrostatic discharge device is used, to prevent damage to electronic
components.
•
Do not attempt internal service of equipment unless another person, capable of rendering aid
and resuscitation, is present.
•
Do not work near rotating fans unless absolutely necessary. Exercise caution to prevent fans
from taking in foreign objects, including hair, clothing, and loose objects.
•
Use care when moving equipment, especially rack-mounted modules, which could become
unstable. Certain items may be heavy. Use proper care when lifting.
Change List for Rev C, January 2012
•
Added RTEMS copyright information to front matter.
Change List for Rev D, June 2015
•
Added a new parameter,
Use Hardware Ptt
, to the section on iDEN Handheld radio
parameters, see
Change List for Rev D1, October 2018
•
Replaced a reference to Windows 2000 and Windows XP with “Windows Operating
Initial Configuration Using the Digi Software Tool
Change List for Rev D2, March 2021
•
Removed login and password references.
•
Updated the Limited Warranty and Limitation of Liability statements.
Change List for Rev D3, April 2021
•
Removed third-party logon and password information.
