Quick Setup for Zetron Consoles
22
025-9623 D3
Configuring Channel Parameters
The Channel A and B parameters are identical, but correspond to the two radio ports on
the back of the iRIM. Channel A and Channel B are configured independently from each
other and can have different settings.
Channel A or Channel B Parameters
Changes to the radio channel parameters take
effect when the configuration is saved; a reboot
is not necessary. The following instructions
apply to both channel A and channel B. To
modify the parameters for channel A, from the
main menu:
1.
Click the
View or Modify
Configuration
button. This will bring
up the
View/Modify Configuration
page.
2.
Click the
Channel A Parameters
button. This will bring up the
Channel
A Configuration
page.
3.
First select
iDEN Handheld
from the
Radio Type
drop-down menu. Once
you’ve selected a radio, the page will
reload itself with more radio specific
configuration items.
4.
Check the
RX Voice Delay
checkbox.
This will delay incoming voice audio
playback until after the iRIM sends the
PTT ID to the console ensuring the
dispatcher will hear the entire call.
5.
The fields
Peak Level From Console
,
Audio Level From Console
, and
Audio Level To Console
are described
in more detail in the following section,
Configuring Console Audio Levels
page
. The default values should
work, but may need adjustment
depending on installation specific
details.
6.
The fields
Audio Level From Radio
and
Audio Level To Radio
should not
need to be modified as they are radio-
specific.
