Zetor FORTERRA HSX Series, Operator'S Manual, Page: 37 / 222

Upper working lights switching on
F18N014
The upper working lights are switched on by pressing the bottom of the switches located on the panel on the
right pillar of the cab. Turning the lights on is indicated by the illuminated symbol on the switch.
A - front working lights
B - rear working lights
Control panel on the right rear mudguard
Controls are located on the control panel on the right rear
fender
1 - Rear PTO shaft option lever (more in the chapter
AGRICULTURAL MACHINE DRIVE)
2 - Electro-hydraulic control panel (more in the chapter
ELECTRO-HYDRAULIC)
3 - Multiplier selector switch (more in the chapter
RUNNING OPERATION)
4 - Differential lock switch (more in the chapter RUNNING
OPERATION)
5 - Front drive axle control switch (see the section
RUNNING OPERATION)
6 - Seven-pin aggregation socket
7 - Lighter
8 - Three-pin socket
9 - Two-pin socket 12V / 15A, + pole marked red
10 - Mounting socket 12V / 10A, not designed for the
lighter
11 - Tractor front height control button (see the section
RUNNING OPERATION)
12 - Front drive axle suspension control switch (see the
section RUNNING OPERATION)
13 - Front drive axle suspension lock control switch (see
the section RUNNING OPERATION)
ACQUAINTANCE WITH THE TRACTOR
36