Zetor FORTERRA HSX Series, Operator'S Manual, Page: 160 / 222

Ballast weights are necessary to additionally load the tractor axles and to ensure manoeuvrability and
stability of the tractor.
*Rear wheel weights
Bottom weights
*Front weights
Combination
of weights
(pcs)
Mass of weights
(kg)
2+6 2 x25 + 6 x30 230
2+10 2 x25 + 10 x30 350
2+14 2 x25 + 14 x30 470
F222
They are installed in case the tractor is not equipped with
the front PTO into the frame tub casting cavity with screws
that are accessible after removal of the battery holder.
Combination
of weights
(pcs)
Mass of weights
(kg)
2 2x34 68
F223
The front weights of the can type are suspended in the
tool carrier. They are protected from lateral movement
with a pin inserted between the central weights. The other
weights are attached to the central ones with two clamps.
Note: After the insertion of the pin the front weights and
the weight carrier can be used as the front hook for
emergency towing of a sunken tractor.
Combination
of weights
(pcs)
Mass of weights
(kg)
3+3 6 x50 300
5+5 10 x50 500
7+7 14 x50 700
F_02_26
BALLAST WEIGHTS
159