Zetor FORTERRA HSX Series, Operator'S Manual, Page: 191 / 222

After draining oil
Replacement of the transmission oil cleaner element with hydraulic pump suction filter
Insertion piece replacement of the oil cleaner with delivery filter of the gearbox switchboard
1 - clean the magnet (it is part of the lid) and the strainer
element of the suctioning filter (2)
2 - after cleaning screw all the drain screws back on
3 - fill oil, start the engine and let it run for approx.
2 minutes
4 - after stopping of the engine and stabilization of the oil
level in the gearbox check its quantity and fill up oil to the
upper edge of the dipstick tab or if increased filling is
necessary, to the lower or upper mark of the dipstick
FH12N078
The oil cleaner is placed on the left side of the gearbox.
Before replacing the oil cleaner element, place
a suitable vessel for dripping oil under the tractor.
1. Unscrew the body of the cleaner (1)
2. Replace the filtration element
3. Reassemble the body of the cleaner
F11N038
Oil cleaner is placed on the left side of the gearbox. The
cleaner clogging is signalized by a control on dashboard
lighting up.
Before replacing the insertion of the oil cleaner,
place a suitable vessel under the tractor for catching
the dripping oil.
1. Unscrew the body of the cleaner (1)
2. Replace the insertion filter
3. Do the back assembly of the body of the cleaner
FH12N055
MAINTENANCE INSTRUCTIONS
190