Zetor FORTERRA HSX Series, Operator'S Manual, Page: 106 / 222

Differential lock control
FHSX18N030
The differential lock control button is located on the panel on the right rear fender.
To activate the the differential lock press the button, which returns to its original position after releasing.
Pressing the part of the button marked with the differential lock symbol will switch on the manual mode of the
differential lock control.
Pressing the button part marked AUTO will activate the automatic differential lock mode.
Turning on the differential lock is signaled by the illuminated symbol on the instrument panel display, the
illuminated instrument panel warning light and the illuminated button.
Applies to both manual and automatic differential lock mode:
The differential lock can not be switched on if the front axle drive is not engaged.
When both brake pedals are depressed, the lock remains closed.
When a drive speed of more than 15 kph is reached for 5 seconds, the differential lock automatically
switches off.
This state is signaled by blinking the button symbol for 5 seconds before switching off the
differential lock.
If the differential lock has been switched off due to a travel speed higher than 15 kph, the differential
lock will not be automatically switched on when the drive speed is drops below and must be
switched on by pressing the button.
To deactivate the differential lock, press the button again or depress one of the brake pedals.
Switching from manual to automatic mode can be done by pressing the automatic mode button.
Differential lock control - automatic mode
To activate the differential lock in automatic mode press
the button in its part with AUTO symbol, the button then
returns to its original position after releasing.
To deactivate the differential lock, press the button again.
Switching on the differential lock in automatic mode is
signaled by the on-screen symbol on the switch and the
AUTO symbol on the dashboard display.
F18N030
DRIVING OPERATION
105