ZeptoMux user manual
v1.05
Safety and installation warnings
Environment
Ambient temperature
Make sure the ambient temperature does not exceed the
maximum ambient temperature allowed for the ZeptoMux
(40ºC). If installed in a closed or multi-unit rack assembly, the
ambient temperature of the rack during operation will be
greater than room ambient.
Air flow
Install the ZeptoMux in the rack in a way that provides
sufficient air flow for safe operation.
Mechanical loading
Mount the ZeptoMux in the rack with a mechanical load that
is evenly distributed and not excessive.
Circuit overloading
Ensure that no overloading of the circuits occurs which might
affect overcurrent protection and supply wiring. The ratings
are provided on the unit.
Earthing
Ensure that the rack-mounted equipment is earthed reliably.
Consider using supply connections other than direct
connections to the branch circuit (e.g. use of power strips).
Power
Check that your ZeptoMux is rated to be used with the mains
power in your country.
Total ZeptoMux ratings:
•
100-240V AC
•
10.58-4.4A
•
50-60Hz
Use only Emerson™ DS460S-3 power supply modules.
Before servicing
Disconnect the two power-supply cables before servicing.
Power cables
Ensure the ZeptoMux uses mains power cables approved in
the country of operation.
Clock battery
CAUTION
: The ZeptoMux has a battery-powered
real-time clock circuit. There is a danger of explosion
if the battery is replaced incorrectly.
Replace only with the same or an equivalent type as
recommended by the manufacturer. Discard used batteries
according to the manufacturer’s instructions.
zeptonics.com/support
© 2012 Zeptonics Pty Ltd
6 of 35
