ZeptoMux user manual
v1.05
Back panel
Figure 4: Back panel of the ZeptoMux.
Figure 4
shows the back panel of the ZeptoMux. Items 1-10 are as follows:
1.
Power supply #1
2.
Power cable socket for power supply #1
3.
Quick-release lever for power supply #1
4.
Fan module #1
5.
Release screws for fan module #1
6.
Release screws for fan module #2
7.
Fan module #2
8.
Power supply #2
9.
Power cable socket for power supply #2
10.
Quick-release lever for power supply #2
Connecting to the ZeptoMux
For management, the ZeptoMux can be connected through the ethernet port
on the front panel (shown in
Figure 3
, item 8). The ZeptoMux can be managed
via a command-line interface or a web-based interface (http). In addition, it
can be connected directly to a PC using a serial connection for command line-
only access. The four ways to access the ZeptoMux are:
•
Serial via the serial port (see
Figure 3
, item 2)
•
Telnet via ethernet
•
SSH via ethernet
•
Web interface via ethernet
Serial connection
Parameters for the serial connection are: baud rate = 9600, 8N1, no flow control.
NOTE: ZeptoMux units with a serial number starting with
ZMUX1-C-003
have a
default serial console baud rate of 38400.
ZeptoMux as DHCP client
By default, the ZeptoMux is configured as a DHCP client which falls back to the
static IP address (defaulted to 192.168.0.1) if the DHCP request times out after 60
seconds.
zeptonics.com/support
© 2012 Zeptonics Pty Ltd
10 of 35
