ZHDN 2500-150
50
Lubrication and fluid level check
www.zepro.com
Image 60. Lubrication points
1
3
4
7
9
10
11
12
2
6
5
8
11
Lubrication and fluid level check
The following lubrication points must be greased on installation. They must then be lubricated at
least once a year.
11.1
Lubrication
Use LE lubricant 4622 or the equivalent.
NOTE.
1. Right tilt cylinder, at lower bearing.
2. Right lift cylinder, at lower bearing.
3. Lift arm right side, at lower bearing.
4. Left lift cylinder, at lower bearing.
5. Left tilt cylinder, at lower bearing.
6. Lift arm left side, at lower bearing.
7. Left tilt cylinder, at upper bearing.
8. Right tilt cylinder, at upper bearing.
9. Lift arm right side, at upper bearing.
10. Right lift cylinder, at upper bearing.
11. Left lift cylinder, at upper bearing.
12. Lift arm left side, at upper bearing.
11.2
Fluid level check
Check the fluid level in the tank during service, top up if necessary. The marking on the hydrau
-
lic tank indicates the type of hydraulic fluid used. Mineral hydraulic fluid, product no. 21963 (1
litre), or biodegradable synthetic fluid, product no. 22235 (1 litre).
