8
The warranty does not apply in the case of:
•
Damage caused by electrical overload:
Damage to electrical parts caused by insufficient battery capacity, e.g. insufficient
installed battery capacity and/or insufficient battery charge in relation to the amount
of lift use.
•
Damage caused by hydraulic overload:
Damage to lift parts caused by tampering with the hydraulic system
•
Damage caused by mechanical overload:
Damage to lift parts caused by overloading or external force.
•
Wear parts:
e.g. support wheels, bearings, shafts, worn or damaged paint, warning flags, stickers,
batteries, rubber bellows, seals between the tail lift and vehicle.
•
Service and maintenance related:
Measures of a purely service and maintenance character. Replacing fuses, adjusting hy-
draulic pressure, adjusting tilt cylinders, adjusting torque. Hydraulic components contam-
inated by dirty hydraulic oil. Dissonance caused by neglected maintenance (lubrication).
•
Incorrect installation:
Damage caused by incorrect installation. Claims for this type of damage must be
submitted to the tail lift seller or installer, or to the service workshop that installed the
spare part.
•
External equipment:
Damage caused by external equipment or materials not approved by ZEPRO. For ex-
ample, equipment connected to the tail lift electrical system. Parts that have previous-
ly been repaired without Z-lyften’s consent.
•
Parts that have been disassembled:
For example, motors, cylinders, solenoids, pressure switches, valves and similar parts.
•
Corrosion:
Surface corrosion on standard fasteners or on components with damaged surface treatment.
Important information
