63
5.3
Daily checks
Perform the following checks before using the lift.
1. Check all stickers for damage and legibility. Replace as necessary. See section “6
Marking” on page 67.
2.
Check flags for damage. Replace as necessary. See section “6.7 Warning flags” on page 72.
3.
Check the warning lights (accessory) for function and damage. See section “3.9.5
Warning lighting (accessory)” on page 23. Contact a qualified service engineer for
troubleshooting or repair.
4. Check two-handed operation for function; see section “3.9.1 Two-handed operation” on
page 23.
Contact a qualified
service engineer for troubleshooting or repair.
5. Look beneath the tail lift to check for oil leaks.
Contact a qualified
service engineer for
troubleshooting or repair.
6. Visually inspect all tail lift components for cracks and deformations. Contact a quali-
fied
service engineer for troubleshooting or repair.
7. Check that the open platform alarm is working as intended. See section “3.9.4 Open
platform alarm” on page 23
8. Check that the platform is clean and safe to access. Remove any snow, mud, dirt,
rubbish or slippery fluids. ZEPRO recommends the use of anti-slip safety shoes with
protective toecaps in accordance with EN ISO 20345. Risk of injury.
Service and maintenance
